SERVICES

    We know that air conditioning is one of the most important things on board or in the office. This is why at PDS-HVAC Holland we make sure that your service, maintenance, or refit will be done as should be and will be done in the most cost-effective and eco-friendly way.

    Our employees are well trained and always updated on the latest regulations. Our employees have their F-gasses certificate and will always perform the service, maintenance following the F-gasses and BRL100 regulations.

    The service and maintenance visit will be done as follows :

    • Electronic leak test of the installation
    • Full run test with service report and recommendations
    • If requested we will take oil samples which will be investigated in a laboratory.
    • Chilled water analysis will be investigated in a laboratory.
    • This online environment of our reports and official documents is always accessible and available for every installation.

    Recommendations :

    From our experience, we see a lot of debris and dirt in the chilled water circuits. This will cause problems with efficiency and will reduce the lifespan of the installation. That's why we are offering the following :

    Installing a partial flow filter and cleaning of the cooled water circuit. With the help of a specialised laboratory that supplies our cleaning products, glycol and anti-corrosion inhibitors. This process will extend the life of your installation, improve its efficiency, and reduce the risk of leaks and malfunctions. By installing a partial filter and cleaning the chilled water loop you can save easily 10 to 25% of energy costs a year.

    Want more information about Air Conditioning?

    Feel free to contact us for more information about air conditioning for HVAC products and systems.

    The Walk in fridge or Freezer needs to be on temperature no matter  what. That's why the Provision cool and freeze plants has our special attention. At PDS-HVAC you are at the right place for this matter. Our high quality service and maintenance plan will make sure everything  is checked and controlled. We If there is malfunction in the provision and freeze plant, most of the time we can repair this instantly.  Since we have a wide range of experience with fridge and freezer systems and ample spare-parts and spare refrigeration gas in stock readily available. 

    For every service and maintenance visit we follow a structured proces: 

    1. Electronic leak test of the installation 
    2. Full run test with service report and recommendations 
    3. If requested oil replacement of the compressors 

    All our reports and official documents hosted in an online environment. Through this document management system we always have the latest document and report version accessible of every installation we have worked on.  

    Provision cool and freeze plants Refits

    For refits of your Provision cool and freeze plants you are at the right place with PDS-HVAC. With our well selected Provision cooling and Freeze Plants we have all your needs onboard. Our provision cooling and freeze plants always come with the latest technology and the refrigeration gas that is selected with a low GWP. This way we think about the environment and you will save on your energy cost.   

    Want more information about Provision Cool and freeze Plants?

    Feel free to contact us for more information about PCP for HVAC products and systems.

    PDS-HVAC is a reliable Dutch partner who has years of experience in software platforms for mechanical engineering, measurement, and control installations. By applying the latest software PDS-HVAC is able to translate the customer’s preference into a perfectly working, customized product. Our process starts by listening to the needs of our clients before designing the software, this allows us to offer a waterproof, personalized solution.

    In close cooperation with our software partner, we can supply complete control of installations. Benefits include:

    • Remote assistance and logging of selected parameters;
    • Separate login for different users;
    • Automatic adjustment of the chilled water setpoint;
    • Automatic change over of compressors;

    Synergy by parallel design of software and hardware
    Our hardware and software engineering run in parallel to guarantee the best fit between the two. Thanks to the close collaboration of these two disciplines at PDS-HVAC, we can provide the perfect automation solution for your project. Rest assured that your house or yacht will be entirely automated according to your needs and specifications and are in line with the norms and regulations.

    Want more information on software for HVAC?

    Feel free to contact us for more information on our software for HVAC products and systems.

    The Fresh air make up units (AHU) are important to maintaining the right temperature and humidity inside your yacht, office or villa. 

    Why are Temperature and humidity the two main ingredients to make your living area comfortable but also to preserve the high quality of your interior?

    Humidity and temperature can have a negative effect on natural materials like wood and leather if not well cared for. When the environment is too humid, it can cause fungus and expansion, but when too dry, it may cause natural materials to crack. PDS-HVAC makes sure you will have a reliable fresh air system that will keep the inside of your yacht or villa in perfect condition by constantly maintaining the required temperature and humidity level.

    The service and maintenance plan will be done as follows: 

    • Full run test with service report and recommendations 
    • If necessary and possible the temperature, RH and pressure sensors will be adjusted at the measured values 
    • Online environment of our reports and official documents. This online environment is always accessible and for every installation possible.  

    Our clients demand the highest standard in central heating from the systems we install and maintain. Temperature and humidity are the two main ingredients to make your living area comfortable but also to preserve the high quality of your interior. PDS-HVAC makes sure you will have a reliable heating system that will keep the inside of your yacht or villa in perfect condition by constantly maintaining the required temperature and humidity level.

    Want more information on heating for marine or villa HVAC systems?

    Feel free to contact us for more information on heating solutions for HVAC products and systems.

    It is most important to keep the engine room well ventilated, at the perfect temperature and humidity level, and cool enough in order to sail safely. A well-balanced system will prevent corrosion and keep the motor risk-free, also at peak performance when the engine needs more power and burns more oxygen.

    Compact ventilation technology

    Our compact cooling technology will also kill the noise inside the engine room and take up less space. We offer solutions to keep the air fresh and so provide a healthy environment for the technicians as well as the passengers. Our Engine room ventilation is eco friendly and uses 30% less energy than your current engine room ventilation unit.

    Want more information about engine room ventilation?

    Feel free to contact us for more information about engine room ventilation for HVAC products and systems.

    HVAC Spare parts & after-sales

    After we have completed a HVAC project for you, our service does not stop. We carry a wide range of HVAC spare parts for your yacht and villa. An important criterium for choosing our suppliers is the 24/7 availability and efficient parts service with quick delivery. This way we can ensure minimal downtime and smooth operation of all your HVAC equipment. In our warehouse we carry spare parts for refrigeration, air conditioning and ventilation systems.

    We can supply a wide range of spare parts anywhere, anytime.

    HVAC maintenance plans

    To ensure correct functioning we carry out periodic inspections. We have maintenance plans fitting a range of different HVAC configurations in Yachts and Villas. 

    Would you like more information about spare parts and maintenance plans for HVAC systems?

    Feel free to contact us for more information on after-sales for HVAC products and systems.

    • FIRST STEP : Diagnosis

      FIRST STEP : Diagnosis

      We make a full diagnosis by taking in account the history and current state of your request. We examine and test to seek clarification and provide documentation and a quote for the works to be done.
    • SECOND STEP : INSTALLATION

      SECOND STEP : INSTALLATION

      We use the most advanced techniques, we developed our own software and work with experienced technicians trained By PSD-HVAC. The installation engineer knows exactly how to take care of the physical installation and configuration requirements. Our engineers are also responsible for providing maintenance and warranty support to our customers.
    • THIRD STEP : AFTER SALES

      THIRD STEP : AFTER SALES

      We make a report with advice and a quote of what else needs to be replaced. We are very fast at delivering parts and replacements parts since we have our own storage space. If required we can use a special service to get spare parts on board within 48 hours after your order is placed.

    Cookies

    PDS-HVAC Holland B.V. is an all-round service and maintenance company in the climate technology sector. We are specialized in climate control, air conditioning, air treatment and also in cooling and freezing installations in the maritime sector as well as villas, HORECA and industrial buildings.